Embedded Mechatronics System Design for Uncertain Environments PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Embedded Mechatronics System Design for Uncertain Environments PDF full book. Access full book title Embedded Mechatronics System Design for Uncertain Environments by Cheng Siong Chin. Download full books in PDF and EPUB format.
Author: Cheng Siong Chin
Publisher:
ISBN: 9781785613234
Category : Embedded computer systems
Languages : en
Pages : 479
Get Book
Book Description
The book has been prepared for the needs of those who seek an application on developing embedded mechatronics system easy for control purposes. The choice of material is guided by the basic objective of making an engineer or student capable of dealing with embedded system design. The book can be used as a textbook, reference book, laboratory exercise for a first course in Linux®-based embedded system, xPC-Target, PIC-Microchip, ARDUINO®, and Raspberry Pi. The contents of the book are organized into seven main chapters with program codes. The main chapters include sections on Linux®-based system design, model-based simulation, and xPC-Target system design. In these chapters, it contains applications on various real-life systems such as the underwater robotics vehicle, vacuum cleaning, climbing robot for inspection, magnetic levitation for conveyor system, temperature monitoring, face recognition and vision-based inspection using camera, and vibration sensor. As it is not possible to cover every single subject in each chapter, the chapters therefore emphasize on certain topics in the embedded systems design process. The software adopted throughout the chapters are Ubuntu/ FedoraTM, PythonTM, QtTM, MATLAB®/Simulink®, and other open-source software development kits from PIC-Microchip, ARDUINO®, and R.
Author: Cheng Siong Chin
Publisher:
ISBN: 9781785613234
Category : Embedded computer systems
Languages : en
Pages : 479
Get Book
Book Description
The book has been prepared for the needs of those who seek an application on developing embedded mechatronics system easy for control purposes. The choice of material is guided by the basic objective of making an engineer or student capable of dealing with embedded system design. The book can be used as a textbook, reference book, laboratory exercise for a first course in Linux®-based embedded system, xPC-Target, PIC-Microchip, ARDUINO®, and Raspberry Pi. The contents of the book are organized into seven main chapters with program codes. The main chapters include sections on Linux®-based system design, model-based simulation, and xPC-Target system design. In these chapters, it contains applications on various real-life systems such as the underwater robotics vehicle, vacuum cleaning, climbing robot for inspection, magnetic levitation for conveyor system, temperature monitoring, face recognition and vision-based inspection using camera, and vibration sensor. As it is not possible to cover every single subject in each chapter, the chapters therefore emphasize on certain topics in the embedded systems design process. The software adopted throughout the chapters are Ubuntu/ FedoraTM, PythonTM, QtTM, MATLAB®/Simulink®, and other open-source software development kits from PIC-Microchip, ARDUINO®, and R.
Author: Cheng Siong Chin
Publisher:
ISBN: 9781523124275
Category : Electronic books
Languages : en
Pages :
Get Book
Book Description
The book has been prepared for the needs of those who seek an application on developing embedded mechatronics system easy for control purposes. The choice of material is guided by the basic objective of making an engineer or student capable of dealing with embedded system design. The book can be used as a textbook, reference book, laboratory exercise for a first course in Linux®-based embedded system, xPC-Target, PIC-Microchip, ARDUINO®, and Raspberry Pi. The contents of the book are organized into seven main chapters with program codes. The main chapters include sections on Linux®-based system design, model-based simulation, and xPC-Target system design. In these chapters, it contains applications on various real-life systems such as the underwater robotics vehicle, vacuum cleaning, climbing robot for inspection, magnetic levitation for conveyor system, temperature monitoring, face recognition and vision-based inspection using camera, and vibration sensor. As it is not possible to cover every single subject in each chapter, the chapters therefore emphasize on certain topics in the embedded systems design process. The software adopted throughout the chapters are Ubuntu/ FedoraTM, PythonTM, QtTM, MATLAB®/Simulink®, and other open-source software development kits from PIC-Microchip, ARDUINO®, and R.
Author: Cheng Siong Chin
Publisher: CRC Press
ISBN: 1000295710
Category : Computers
Languages : en
Pages : 164
Get Book
Book Description
This book supports readers in the development of a remotely operated vehicle (ROV) pilot training simulator by exploiting open-source or free gaming software and emphasizing the importance of using established and widely-available game design techniques to provide engaging scenarios for ROV training developers and trainees. There is no such book to guide the users to create an open-source virtual simulator for pilot training in the marine and offshore industry. This book can be used as a reference for undergraduate and postgraduate students, engineers, researchers, and lecturers in VR simulation using UnityTM as the leading software. Some of the key features of the book include: • Step-by-step procedures in development ROV pilot training simulator • Use of open-source software UnityTM that is freely available to all readers • The codes used in the book are self-sufficient as there are no codes hidden from readers
Author: Cheng Siong Chin
Publisher: Springer Nature
ISBN: 9811565112
Category : Technology & Engineering
Languages : en
Pages : 140
Get Book
Book Description
This book is intended to meet the needs of those who seek to develop control systems for ROVs when there is no model available during the initial design stage. The modeling, simulation and application of marine vehicles like underwater robotic vehicles (URVs) are multidisciplinary, and combine mathematical aspects from various engineering disciplines. URVs such as remotely operated vehicle (ROVs) are used for a wide range of applications such as exploring the extreme depths of our ocean, where a hard-wired link is still required. Most ROVs operate in extreme environments with uncertainties in the model prior to control system design. However, the method involved extensive testing before the system model could be used for any control actions. It has been found that the range of error can be extensive and uncertain in actual, continuously varying conditions. Hence, it is important to address the problem of reliance on model testing using different modeling approaches. In this book, approaches such as WAMIT, ANSYS-CFX, STAR CCM+, MATLAB and Simulink are used to model parameters for ROVs. A few benchmark models are provided, allowing researchers and students to explore and test different control schemes. Given its scope, the book offers a valuable reference guide for postgraduate and undergraduate students engaged in modeling and simulation for ROV control.
Author: Abdelkhalak El Hami
Publisher: ISTE Press - Elsevier
ISBN: 1785481908
Category : Technology & Engineering
Languages : en
Pages : 298
Get Book
Book Description
Embedded Mechatronic Systems 2: Analysis of Failures, Modeling, Simulation and Optimization presents advances in research within the field of mechatronic systems, which integrates reliability into the design process. Providing many detailed examples, this book develops a characterization methodology for faults in mechatronic systems. It analyzes the multi-physical modeling of faults, revealing weaknesses in design and failure mechanisms. This development of meta-models enables us to simulate effects on the reliability of conditions of use and manufacture. Provides many detailed examples Develops a characterization methodology for faults in mechatronic systems Analyzes the multi-physical modeling of faults, revealing weaknesses in design and failure mechanisms
Author: Cheng Siong Chin
Publisher: Control, Robotics and Sensors
ISBN: 1785613227
Category : Technology & Engineering
Languages : en
Pages : 478
Get Book
Book Description
Industrial machines, automobiles, airplanes, robots, and machines are among the myriad possible hosts of embedded systems. This book has been prepared for those who seek to easily develop and design embedded systems for control purposes in robotic vehicles.
Author: Sahin Yildirim
Publisher: BoD – Books on Demand
ISBN: 9535131257
Category : Technology & Engineering
Languages : en
Pages : 165
Get Book
Book Description
This book can serve as a reference resource for those very same design and control engineers who help connect their everyday experience in design with the control field of mechatronics. This book also consists of basic and main mechatronic system's laboratory applications for use in research and development departments in academia, government, and industry, and it can be used as a reference source in university libraries. It can also be used as a resource for scholars interested in understanding and explaining the engineering design and control process and for engineering students studying within the traditional structure of most engineering departments and colleges. It is evident that there is an expansion of mechatronics laboratories and classes in the university environment worldwide.
Author: Viacheslav Pshikhopov
Publisher: Butterworth-Heinemann
ISBN: 0128123060
Category : Computers
Languages : en
Pages : 312
Get Book
Book Description
Path Planning for Vehicles Operating in Uncertain 2D-environments presents a survey that includes several path planning methods developed using fuzzy logic, grapho-analytical search, neural networks, and neural-like structures, procedures of genetic search, and unstable motion modes. Presents a survey of accounting limitations imposed by vehicle dynamics Proposes modified and new original methods, including neural networking, grapho-analytical, and nature-inspired Gives tools for a novice researcher to select a method that would suit their needs or help to synthesize new hybrid methods
Author: Alexandru Forrai
Publisher: Springer Science & Business Media
ISBN: 3642285953
Category : Technology & Engineering
Languages : en
Pages : 268
Get Book
Book Description
Control system design is a challenging task for practicing engineers. It requires knowledge of different engineering fields, a good understanding of technical specifications and good communication skills. The current book introduces the reader into practical control system design, bridging the gap between theory and practice. The control design techniques presented in the book are all model based., considering the needs and possibilities of practicing engineers. Classical control design techniques are reviewed and methods are presented how to verify the robustness of the design. It is how the designed control algorithm can be implemented in real-time and tested, fulfilling different safety requirements. Good design practices and the systematic software development process are emphasized in the book according to the generic standard IEC61508. The book is mainly addressed to practicing control and embedded software engineers - working in research and development – as well as graduate students who are faced with the challenge to design control systems and implement them in real-time.
Author: Jan Awrejcewicz
Publisher: Springer Nature
ISBN: 303077306X
Category : Mathematics
Languages : en
Pages : 286
Get Book
Book Description
This volume is part of collection of contributions devoted to analytical and experimental techniques of dynamical systems, presented at the 15th International Conference “Dynamical Systems: Theory and Applications”, held in Łódź, Poland on December 2-5, 2019. The wide selection of material has been divided into three volumes, each focusing on a different field of applications of dynamical systems. The broadly outlined focus of both the conference and these books includes bifurcations and chaos in dynamical systems, asymptotic methods in nonlinear dynamics, dynamics in life sciences and bioengineering, original numerical methods of vibration analysis, control in dynamical systems, optimization problems in applied sciences, stability of dynamical systems, experimental and industrial studies, vibrations of lumped and continuous systems, non-smooth systems, engineering systems and differential equations, mathematical approaches to dynamical systems, and mechatronics.
