Author: Sandeep Dogra
Publisher: CADArtifex
ISBN:
Category : Computers
Languages : en
Pages : 274

Get Book

Book Description
SOLIDWORKS Simulation 2021: A Power Guide for Beginners and Intermediate Users textbook is designed for instructor-led courses as well as for self-paced learning. It is intended to help engineers and designers interested in learning finite element analysis (FEA) using SOLIDWORKS Simulation. This textbook benefits new SOLIDWORKS Simulation users and is a great teaching aid in classroom training. It consists of 10 chapters, with a total of 394 pages covering various types of finite element analysis (FEA) such as Linear Static Analysis, Buckling Analysis, Fatigue Analysis, Frequency Analysis, Drop Test Analysis, and Non-linear Static Analysis. This textbook covers important concepts and methods used in finite element analysis (FEA) such as Preparing Geometry, Boundary Conditions (load and fixture), Element Types, Interactions, Connectors, Meshing, Mesh Controls, Mesh Check (Aspect Ratio check and Jacobian check), Adaptive Meshing (H-Adaptive and P-Adaptive), Iterative Methods (Newton-Raphson Scheme and Modified Newton-Raphson Scheme), Incremental Methods (Force, Displacement, or Arc Length), and so on. This textbook not only focuses on the usage of the tools of SOLIDWORKS Simulation but also on the fundamentals of Finite Element Analysis (FEA) through various real-world case studies. The case studies used in this textbook allow users to solve various real-world engineering problems by using SOLIDWORKS Simulation step-by-step. Also, the Hands-on test drives are given at the end of chapters that allow users to experience themselves the ease-of-use and immense capacities of SOLIDWORKS Simulation.

Author: John Willis
Publisher: Independently Published
ISBN:
Category :
Languages : en
Pages : 396

Get Book

Book Description
Black & White Edition. The Full Color Edition is also available SOLIDWORKS Simulation 2021: A Power Guide for Beginners and Intermediate Users textbook is designed for instructor-led courses as well as for self-paced learning. It is intended to help engineers and designers interested in learning finite element analysis (FEA) using SOLIDWORKS Simulation. This textbook benefits new SOLIDWORKS Simulation users and is a great teaching aid in classroom training. It consists of 10 chapters, with a total of 394 pages covering various types of finite element analysis (FEA) such as Linear Static Analysis, Buckling Analysis, Fatigue Analysis, Frequency Analysis, Drop Test Analysis, and Non-linear Static Analysis. This textbook covers important concepts and methods used in finite element analysis (FEA) such as Preparing Geometry, Boundary Conditions (load and fixture), Element Types, Contacts, Connectors, Meshing, Mesh Controls, Mesh Check (Aspect Ratio check and Jacobian check), Adaptive Meshing (H-Adaptive and P-Adaptive), Iterative Methods (Newton-Raphson Scheme and Modified Newton-Raphson Scheme), Incremental Methods (Force, Displacement, or Arc Length), and so on. This textbook not only focuses on the usages of the tools of SOLIDWORKS Simulation but also on the fundamentals of finite element analysis (FEA) through various real-world Case Studies. The Case Studies used in this textbook allow users to solve various real-world engineering problems by using SOLIDWORKS Simulation step-by-step. Also, the Hands-on Test Drives are given at the end of chapters that allow users to experience themselves the ease-of-use and immense capacities of SOLIDWORKS Simulation. Every chapter begins with learning objectives related to the topics covered in that chapter. Moreover, every chapter ends with a summary which lists the topics learned in that chapter followed by questions to assess the knowledge. Table of Contents: Chapter 1. Introduction to FEA and SOLIDWORKS Simulation Chapter 2. Introduction to Analysis Tools and Static Analysis Chapter 3. Case Studies of Static Analysis Chapter 4. Interactions and Connectors Chapter 5. Adaptive Mesh Methods Chapter 6. Buckling Analysis Chapter 7. Fatigue Analysis Chapter 8. Frequency Analysis Chapter 9. Drop Test Analysis Chapter 10. Non-Linear Static Analysis Main Features of the Textbook Comprehensive coverage of tools Step-by-step real-world case studies Hands-on test drives to enhance the skills at the end of chapters Additional notes and tips Customized content for faculty (PowerPoint Presentations) Free learning resources for students and faculty Technical support for the book: [email protected]

Author: Sandeep Dogra
Publisher: CADArtifex
ISBN:
Category : Computers
Languages : en
Pages : 561

Get Book

Book Description
SOLIDWORKS 2021: A Power Guide for Beginners and Intermediate Users textbook has been designed for instructor-led courses as well as self-paced learning. It is intended to help engineers and designers interested in learning SOLIDWORKS for creating 3D mechanical design. This textbook is a great help for new SOLIDWORKS users and a great teaching aid in classroom training. This textbook consists of 14 chapters, with a total of 798 pages covering the major environments of SOLIDWORKS such as Sketching environment, Part modeling environment, Assembly environment, and Drawing environment. This textbook teaches users to use SOLIDWORKS mechanical design software for creating parametric 3D solid components, assemblies, and 2D drawings. This textbook also includes a chapter on creating multiple configurations of a design. This textbook not only focuses on the usage of the tools and commands of SOLIDWORKS but also on the concept of design. Every chapter in this textbook contains tutorials that provide users with step-by-step instructions for creating mechanical designs and drawings with ease. Moreover, every chapter ends with hands-on test drives which allow users to experience the user friendly and technical capabilities of SOLIDWORKS.

Author: John Willis
Publisher: Independently Published
ISBN:
Category :
Languages : en
Pages : 798

Get Book

Book Description
SOLIDWORKS 2021: A Power Guide for Beginners and Intermediate User textbook has been designed for instructor-led courses as well as self-paced learning. It is intended to help engineers and designers interested in learning SOLIDWORKS for creating 3D mechanical design. This textbook is a great help for new SOLIDWORKS users and a great teaching aid in classroom training. This textbook consists of 14 chapters, with a total of 798 pages covering the major environments of SOLIDWORKS such as Sketching environment, Part modeling environment, Assembly environment, and Drawing environment. This textbook teaches users to use SOLIDWORKS mechanical design software for creating parametric 3D solid components, assemblies, and 2D drawings. This textbook also includes a chapter on creating multiple configurations of a design. This textbook not only focuses on the usage of the tools and commands of SOLIDWORKS but also on the concept of design. Every chapter in this textbook contains tutorials that provide users with step-by-step instructions for creating mechanical designs and drawings with ease. Moreover, every chapter ends with hands-on test drives which allow users to experience the user friendly and technical capabilities of SOLIDWORKS. Table of Contents: Chapter 1. Introduction to SOLIDWORKS Chapter 2. Drawing Sketches with SOLIDWORKS Chapter 3. Editing and Modifying Sketches Chapter 4. Applying Geometric Relations and Dimensions Chapter 5. Creating First/Base Feature of Solid Models Chapter 6. Creating Reference Geometries Chapter 7. Advanced Modeling - I Chapter 8. Advanced Modeling - II Chapter 9. Patterning and Mirroring Chapter 10. Advanced Modeling - III Chapter 11. Working with Configurations Chapter 12. Working with Assemblies - I Chapter 13. Working with Assemblies - II Chapter 14. Working with Drawings Main Features of the Textbook Comprehensive coverage of tools Step-by-step real-world tutorials with every chapter Hands-on test drives to enhance the skills at the end of every chapter Additional notes and tips Customized content for faculty (PowerPoint Presentations) Free learning resources for faculty and students Additional student and faculty projects Technical support for the book by contacting [email protected]

Author: Sandeep Dogra
Publisher: CADArtifex
ISBN:
Category : Computers
Languages : en
Pages : 280

Get Book

Book Description
SOLIDWORKS Simulation 2020: A Power Guide for Beginners and Intermediate Users textbook is designed for instructor-led courses as well as for self-paced learning. It is intended to help engineers and designers interested in learning finite element analysis (FEA) using SOLIDWORKS Simulation. This textbook benefits new SOLIDWORKS Simulation users and is a great teaching aid in classroom training. It consists of 10 chapters, a total of 390 pages covering various types of finite element analysis (FEA) such as Linear Static Analysis, Buckling Analysis, Fatigue Analysis, Frequency Analysis, Drop Test Analysis, and Non-linear Static Analysis. This textbook covers important concepts and methods used in finite element analysis (FEA) such as Preparing Geometry, Boundary Conditions (load and fixture), Element Types, Contacts, Connectors, Meshing, Mesh Controls, Mesh Check (Aspect Ratio check and Jacobian check), Adaptive Meshing (H-Adaptive and P-Adaptive), Iterative Methods (Newton-Raphson Scheme and Modified Newton-Raphson Scheme), Incremental Methods (Force, Displacement, or Arc Length), and so on. This textbook not only focuses on the usages of the tools of SOLIDWORKS Simulation but also on the fundamentals of finite element analysis (FEA) through various real-world Case Studies. The Case Studies used in this textbook allow users to solve various real-world engineering problems by using SOLIDWORKS Simulation step-by-step. Also, the Hands-on Test Drives are given at the end of chapters that allow users to experience themselves the ease-of-use and immense capacities of SOLIDWORKS Simulation. Every chapter begins with learning objectives related to the topics covered in that chapter. Moreover, every chapter ends with a summary which lists the topics learned in that chapter followed by questions to assess the knowledge. Table of Contents: Chapter 1. Introduction to FEA and SOLIDWORKS Simulation Chapter 2. Introduction to Analysis Tools and Static Analysis Chapter 3. Case Studies of Static Analysis Chapter 4. Contacts and Connectors Chapter 5. Adaptive Mesh Methods Chapter 6. Buckling Analysis Chapter 7. Fatigue Analysis Chapter 8. Frequency Analysis Chapter 9. Drop Test Analysis Chapter 10. Non-Linear Static Analysis Main Features of the Textbook Comprehensive coverage of tools Step-by-step real-world case studies Hands-on test drives to enhance the skills at the end of chapters Additional notes and tips Customized content for faculty (PowerPoint Presentations) Free learning resources for students and faculty Technical support for the book: [email protected]

Author: Sandeep Dogra
Publisher: CADArtifex
ISBN:
Category : Computers
Languages : en
Pages : 291

Get Book

Book Description
SOLIDWORKS Simulation 2024: A Power Guide for Beginners and Intermediate Users textbook is designed for instructor-led courses and self-paced learning. It is intended to help engineers and designers interested in learning Finite Element Analysis (FEA) using SOLIDWORKS Simulation. This textbook benefits new SOLIDWORKS Simulation users and is a great teaching aid in classroom training. It consists of 10 chapters, with a total of 398 pages covering various types of Finite Element Analysis (FEA) such as Linear Static Analysis, Buckling Analysis, Fatigue Analysis, Frequency Analysis, Drop Test Analysis, and Non-linear Static Analysis. This textbook covers important concepts and methods used in Finite Element Analysis (FEA) such as Preparing Geometry, Boundary Conditions (load and fixture), Element Types, Interactions, Connectors, Meshing, Mesh Controls, Mesh Check (Aspect Ratio check and Jacobian check), Adaptive Meshing (H-Adaptive and P-Adaptive), Iterative Methods (Newton-Raphson Scheme and Modified Newton-Raphson Scheme), Incremental Methods (Force, Displacement, or Arc Length), and so on. This textbook not only focuses on using the tools of SOLIDWORKS Simulation but also on the fundamentals of Finite Element Analysis (FEA) through various real-world case studies. The case studies used in this textbook allow users to solve various real-world engineering problems by using SOLIDWORKS Simulation step-by-step. Also, the Hands-on test drives given at the end of chapters allow users to experience the ease of use and immense capacities of SOLIDWORKS Simulation.

Author: Sandeep Dogra
Publisher: CADArtifex
ISBN:
Category : Computers
Languages : en
Pages : 99

Get Book

Book Description
SOLIDWORKS Surface Design 2021 for Beginners and Intermediate Users textbook has been designed for instructor-led courses as well as self-paced learning. It is intended to help engineers and designers interested in learning SOLIDWORKS for creating real-world surface models. This textbook is a great help for SOLIDWORKS users new to surface design. It consists of total 106 pages covering the surface design environment of SOLIDWORKS. It teaches users to use SOLIDWORKS mechanical design software for creating parametric complex shape surface models that are not possible to create with solid modeling due to its limitations. This textbook not only focuses on the usage of the tools and commands of SOLIDWORKS for creating surface models but also on the concept of design. It contains Tutorials followed by theory that provide users with step-by-step instructions for creating surface designs. Moreover, it ends with Hands-on Test Drives which allow users to experience the user friendly and technical capabilities of SOLIDWORKS. Main Features of the Textbook: • Comprehensive coverage of tools • Step-by-step real-world tutorials with every chapter • Hands-on test drives to enhance the skills at the end of every chapter • Additional notes and tips • Customized content for faculty (PowerPoint Presentations) • Free learning resources for faculty and students • Technical support for the book by contacting [email protected]

Author: Sandeep Dogra
Publisher: CADArtifex
ISBN:
Category : Computers
Languages : en
Pages : 548

Get Book

Book Description
AutoCAD 2024: A Power Guide for Beginners and Intermediate Users textbook is designed for instructor-led courses as well as for self-paced learning. It is intended to help engineers, designers, and CAD operators interested in learning AutoCAD for creating 2D engineering drawings as well as 3D Models. This textbook is a great help for new AutoCAD users and a great teaching aid for classroom training. The textbook consists of 13 chapters, and a total of 548 pages covering major workspaces of AutoCAD such as Drafting & Annotation and 3D Modeling, teaching you to use AutoCAD software for creating, editing, plotting, and managing real world 2D engineering drawings and 3D Models. This textbook not only focuses on the usage of the tools/commands of AutoCAD but also on the concept of design. Every chapter of this textbook contains tutorials that provide users with step-by-step instructions on how to easily create mechanical designs and drawings. Moreover, every chapter ends with hands-on test drives allowing users to experience AutoCAD’s user-friendly and powerful capabilities.

Author: Sandeep Dogra
Publisher: CADArtifex
ISBN:
Category : Computers
Languages : en
Pages : 499

Get Book

Book Description
AutoCAD 2023: A Power Guide for Beginners and Intermediate Users textbook is designed for instructor-led courses as well as for self-paced learning. It is intended to help engineers, designers, and CAD operators interested in learning AutoCAD for creating 2D engineering drawings as well as 3D Models. This textbook is a great help for new AutoCAD users and a great teaching aid for classroom training. The textbook consists of 13 chapters, and a total of 548 pages covering major workspaces of AutoCAD such as Drafting & Annotation and 3D Modeling, teaching you to use AutoCAD software for creating, editing, plotting, and managing real world 2D engineering drawings and 3D Models. This textbook not only focuses on the usage of the tools/commands of AutoCAD but also on the concept of design. Every chapter of this textbook contains tutorials that provide users with step-by-step instructions on how to create mechanical designs and drawings with ease. Moreover, every chapter ends with hands-on test drives which allow users to experience themselves the user friendly and powerful capabilities of AutoCAD. Table of Contents Chapter 1. Introduction to AutoCAD Chapter 2. Creating Drawings - I Chapter 3. Working with Drawing Aids and Layers Chapter 4. Creating Drawings - II Chapter 5. Modifying and Editing Drawings - I Chapter 6. Working with Dimensions and Dimensions Style Chapter 7. Editing Dimensions and Adding Text Chapter 8. Modifying and Editing Drawings - II Chapter 9. Hatching and Gradients Chapter 10. Working with Blocks and Xrefs Chapter 11. Working with Layouts Chapter 12. Printing and Plotting Chapter 13. Introducing 3D Basics and Creating 3D Models Main Features of the Textbook Comprehensive coverage of tools Step-by-step real-world tutorials with every chapter Hands-on test drives to enhance the skills at the end of every chapter Additional notes and tips Customized content for faculty (PowerPoint Presentations) Free learning resources for faculty and students Additional student and faculty projects Technical support for the book by contacting [email protected]

Author: CADArtifex
Publisher: Createspace Independent Publishing Platform
ISBN: 9781985847989
Category :
Languages : en
Pages : 392

Get Book

Book Description
SOLIDWORKS Simulation 2018: A Power Guide for Beginners and Intermediate Users textbook is designed for instructor-led courses as well as for self-paced learning. It is intended to help engineers and designers interested in learning SOLIDWORKS Simulation for performing various types of finite element analysis (FEA). This textbook is a great help for new SOLIDWORKS Simulation users and a great teaching aid in a classroom training too. This textbook consists of 10 chapters, total 392 pages covering various types of analysis: Linear Static analysis, Buckling analysis, Fatigue analysis, Frequency analysis, Drop Test analysis, and Non-linear Static analysis. This textbook covers important concepts and methods used in finite element analysis (FEA) such as Preparing Geometry, Boundary Conditions (load and fixture), Element Types, Contacts, Connectors, Meshing, Mesh Controls, Mesh Quality Check (Jacobian Check and Aspect Ratio), Adaptive Meshing (H-Adaptive and P-Adaptive), Iterative Methods (Newton-Raphson Scheme and Modified Newton-Raphson Scheme), Incremental Methods (Force, Displacement, or Arc Length), and so on. This textbook not only focuses on the usages of the tools of SOLIDWORKS Simulation but also on the fundamentals of Finite Element Analysis (FEA) through various real-world case studies. The case studies used in this textbook allow users to solve various real-world engineering problems, step-by-step. Also, the Hands-on test drives are given at the end of chapters that allow users to experience themselves the ease-of-use and powerful capabilities of SOLIDWORKS Simulation. Every chapter begins with learning objectives related to the topics covered in that chapter. Moreover, every chapter ends with a summary which lists the topics learned in that chapter followed by questions to assess the knowledge. Table of Contents: Chapter 1. Introduction to FEA and SOLIDWORKS Simulation Chapter 2. Introduction to Analysis Tools and Static Analysis Chapter 3. Case Studies of Static Analysis Chapter 4. Contacts and Connectors Chapter 5. Adaptive Mesh Methods Chapter 6. Buckling Analysis Chapter 7. Fatigue Analysis Chapter 8. Frequency Analysis Chapter 9. Drop Test Analysis Chapter 10. Non-Linear Static Analysis Main Features of the Textbook Comprehensive coverage of tools Step-by-step real-world case studies Hands-on test drives to enhance the skills at the end of chapters Additional notes and tips Customized content for faculty (PowerPoint Presentations) Free learning resources for students and faculty Technical support for the book: [email protected]