Rolling Contact Fatigue in a Vacuum

Rolling Contact Fatigue in a Vacuum PDF Author: Michael Danyluk
Publisher: Springer
ISBN: 3319119303
Category : Technology & Engineering
Languages : en
Pages : 167

Get Book

Book Description
This book deals with wear and performance testing of thin solid film lubrication and hard coatings in an ultra-high vacuum (UHV), a process which enables rapid accumulation of stress cycles compared with testing in oil at atmospheric pressure. The authors’ lucid and authoritative narrative broadens readers' understanding of the benefits of UHV testing: a cleaner, shorter test is achieved in high vacuum, disturbance rejection by the deposition controller may be optimized for maximum fatigue life of the coating using rolling contact fatigue testing (RCF) in a high vacuum, and RCF testing in UHV conditions enables a faster study of deposition control parameters. In short, Rolling Contact Fatigue in a Vacuum is an indispensable resource for researchers and engineers concerned with thin film deposition, solar flat panel manufacturing, physical vapor deposition, MEMS manufacturing (for lubrication of MEMS), tribology in a range of industries, and automotive and marine wear coatings for engines and transmissions.

Rolling Contact Fatigue in a Vacuum

Rolling Contact Fatigue in a Vacuum PDF Author: Michael Danyluk
Publisher: Springer
ISBN: 3319119303
Category : Technology & Engineering
Languages : en
Pages : 167

Get Book

Book Description
This book deals with wear and performance testing of thin solid film lubrication and hard coatings in an ultra-high vacuum (UHV), a process which enables rapid accumulation of stress cycles compared with testing in oil at atmospheric pressure. The authors’ lucid and authoritative narrative broadens readers' understanding of the benefits of UHV testing: a cleaner, shorter test is achieved in high vacuum, disturbance rejection by the deposition controller may be optimized for maximum fatigue life of the coating using rolling contact fatigue testing (RCF) in a high vacuum, and RCF testing in UHV conditions enables a faster study of deposition control parameters. In short, Rolling Contact Fatigue in a Vacuum is an indispensable resource for researchers and engineers concerned with thin film deposition, solar flat panel manufacturing, physical vapor deposition, MEMS manufacturing (for lubrication of MEMS), tribology in a range of industries, and automotive and marine wear coatings for engines and transmissions.

Performance Evaluation of Bearings

Performance Evaluation of Bearings PDF Author: Rakesh Sehgal
Publisher: BoD – Books on Demand
ISBN: 9535107860
Category : Technology & Engineering
Languages : en
Pages : 252

Get Book

Book Description
Bearings (both plain and rolling element) are used as important supporting elements for locating rotating components and confining their motion in desired direction. In order to ensure their operational reliability and desired life, these need to be properly designed/selected for an application more so because of ever increasing operational speeds. This requires the careful performance evaluation of different types of bearings considering aspects such as thermal stability, lubrication, contaminants in lubricants and controlling mechanism etc. The title of this book was specifically chosen as Performance Evaluation of Bearings. The present book is a compilation of different aspects contributing towards the performance evaluation of plain bearings (both journal and thrust), rolling element bearings and magnetic bearings.

Processing of Nanoparticle Materials and Nanostructured Films

Processing of Nanoparticle Materials and Nanostructured Films PDF Author: Kathy Lu
Publisher: John Wiley & Sons
ISBN: 0470931000
Category : Technology & Engineering
Languages : en
Pages : 196

Get Book

Book Description
There have been extraordinary developments in nanomaterials in the past two decades. Nanomaterial processing is one of the key components for this success. This volume, titled Processing of Nanoparticle Materials and Nanostructured Films, is a collection of the papers presented at Controlled Processing of Nanoparticle-based Materials and Nanostructured Films symposium held during the Materials Science and Technology 2009 conference (MS&T’09), October 25-29, 2009 in Pittsburgh, PA. It summarizes the progress that has been achieved most recently in understanding and processing nanoparticle-based materials and nanostructured films. Nanoparticle-based materials and nanostructured films hold great promise to enable a broad range of new applications. This includes high energy conversion efficiency fuel cells, smart materials, high performance sensors, and structural materials under extreme environments. However, many barriers still exist in understanding and controlling the processing of nanoparticle-based materials and nanostructured films. In particular, agglomeration must be controlled in powder synthesis and processing to enable the fabrication of homogeneous green or composite microstructures, and microstructure evolution must be controlled to preserve the size and properties of the nanostructures in the finished materials. Also, novel nanostructure designs are highly needed at all stages of bulk and thin film nanomaterial formation process to enable unique performances, low cost, and green engineering. This volume focuses on three general topics, 1) Processing to preserve and improve nanoscale size, structure, and properties, 2) Novel design and understanding of new nanomaterials, such as new synthesis approaches, templating, and 3D assembly technologies, and 3) Applications of nanoparticle assemblies and composites and thin films.

Scientific and Technical Aerospace Reports

Scientific and Technical Aerospace Reports PDF Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 996

Get Book

Book Description


A Study of Some Factors Affecting Rolling-contact Fatigue Life

A Study of Some Factors Affecting Rolling-contact Fatigue Life PDF Author: Thomas L.. Carter
Publisher:
ISBN:
Category : Lubrication and lubricants
Languages : en
Pages : 56

Get Book

Book Description


Metallurgical Coatings and Thin Films 1990

Metallurgical Coatings and Thin Films 1990 PDF Author: B.D. Sartwell
Publisher: Elsevier
ISBN: 0444601104
Category : Technology & Engineering
Languages : en
Pages : 1129

Get Book

Book Description
Metallurgical Coatings and Thin Films 1990 presents the Proceedings of the 17th International Conference on Metallurgical Coatings and 8th International Conference on Thin Films, held in San Diego, California on April 2-6, 1990. It contains 219 papers covering a wide range of topics related to metallurgical coatings and thin films, including high temperature coatings, hard coatings, diamond films, tribology, and ion beam modification. Organized into 99 chapters, this volume begins with a discussion of a thermochemical model for diamond growth from the vapor phase and an experiment in large area diamond coating using a combustion flame torch in its traversing mode. It then explores the properties of diamond films, preparation of diamond-like carbon films using various ion-beam-assisted techniques, deposition of diamond-like films by laser ablation, and coating of cubic BN films on different substrates. The book examines surface processes and rate-determining steps in plasma-induced chemical vapor deposition, and addition of rare earths to improve scale adherence on heat-resisting alloys and coatings. The reader is introduced to high temperature wear and clearance control coatings, thermal barrier coatings, and corrosion resistant coatings. The book also discusses modification of coatings/surfaces to reduce friction; the mechanics of the tribology of thin films systems; mechanochemical interactions in the tribological behavior of materials; analysis and micromechanical testing of tribological coatings; surface modification using directed ion beams; and industrial equipment and processes. This book is a valuable resource for students and researchers interested in metallurgical coatings and thin films.

NASA Scientific and Technical Reports

NASA Scientific and Technical Reports PDF Author: United States. National Aeronautics and Space Administration Scientific and Technical Information Division
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 1440

Get Book

Book Description


A Selected Listing of NASA Scientific and Technical Reports for ...

A Selected Listing of NASA Scientific and Technical Reports for ... PDF Author: United States. National Aeronautics and Space Administration. Scientific and Technical Information Division
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 1156

Get Book

Book Description


Rolling Contact Fatigue Testing of Bearings Steels

Rolling Contact Fatigue Testing of Bearings Steels PDF Author: J. J. C. Hoo
Publisher: ASTM International
ISBN:
Category :
Languages : en
Pages : 420

Get Book

Book Description


Gear Materials, Properties, and Manufacture

Gear Materials, Properties, and Manufacture PDF Author: Joseph R. Davis
Publisher: ASM International
ISBN: 1615030492
Category : Technology & Engineering
Languages : en
Pages : 349

Get Book

Book Description
All of the critical technical aspects of gear materials technology are addressed in this new reference work. Gear Materials, Properties, and Manufacture is intended for gear metallurgists and materials specialists, manufacturing engineers, lubrication technologists, and analysts concerned with gear failures who seek a better understanding of gear performance and gear life. This volume complements other gear texts that emphasize the design, geometry, and theory of gears. The coverage begins with an overview of the various types of gears used, important gear terminology, applied stresses and strength requirements associated with gears, and lubrication and wear. This is followed by in-depth treatment of metallic (ferrous and nonferrous alloys) and plastic gear materials. Emphasis is on the properties of carburized steels, the material of choice for high-performance power transmission gearing.