Metallography of Steels: Interpretation of Structure and the Effects of Processing PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Metallography of Steels: Interpretation of Structure and the Effects of Processing PDF full book. Access full book title Metallography of Steels: Interpretation of Structure and the Effects of Processing by Hubertus Colpaert. Download full books in PDF and EPUB format.
Author: Hubertus Colpaert
Publisher: ASM International
ISBN: 1627081496
Category : Technology & Engineering
Languages : en
Pages :
Get Book
Book Description
Updated and translated by André Luiz V. da Costa e Silva This book is a combination of a metallographic atlas for steels and cast irons and an introductory textbook covering the fundamentals of phase transformations and heat treatment of these materials. Every important stage of processing, from casting to cold working is clearly discussed and copiously illustrated with metallographs that show the obtained structures, both desired and those achieved when deviations occur. First published in 1951 by Professor Hubertus Colpaert from the Institute for Technological Research (IPT) of São Paulo, Brazil, this book became one of the most important Brazilian references for professionals interested in the processing, treatment, and application of steels and cast irons. In the Fourth Edition and English translation, updated and translated by Professor André Luiz V. da Costa e Silva, the concept of the of the original edition was preserved while the important developments of recent decades, both in metallographic characterization and in steel and iron products, as well as progress in the understanding of the transformations that made the extraordinary developments of these alloys possible, were added. Most metallographs are of actual industrial materials and a large number originate from industry leaders or laboratories at the forefront of steel and iron development. As steel continues to be the most widely used metallic material in the world, Metallography of Steels continues to be an essential reference for students, metallographers, and engineers interested in understanding processing-properties-structure relationships of the material. The balance between theoretical and applied information makes this book a valuable companion for even experienced steel practitioners.
Author: Hubertus Colpaert
Publisher: ASM International
ISBN: 1627081496
Category : Technology & Engineering
Languages : en
Pages :
Get Book
Book Description
Updated and translated by André Luiz V. da Costa e Silva This book is a combination of a metallographic atlas for steels and cast irons and an introductory textbook covering the fundamentals of phase transformations and heat treatment of these materials. Every important stage of processing, from casting to cold working is clearly discussed and copiously illustrated with metallographs that show the obtained structures, both desired and those achieved when deviations occur. First published in 1951 by Professor Hubertus Colpaert from the Institute for Technological Research (IPT) of São Paulo, Brazil, this book became one of the most important Brazilian references for professionals interested in the processing, treatment, and application of steels and cast irons. In the Fourth Edition and English translation, updated and translated by Professor André Luiz V. da Costa e Silva, the concept of the of the original edition was preserved while the important developments of recent decades, both in metallographic characterization and in steel and iron products, as well as progress in the understanding of the transformations that made the extraordinary developments of these alloys possible, were added. Most metallographs are of actual industrial materials and a large number originate from industry leaders or laboratories at the forefront of steel and iron development. As steel continues to be the most widely used metallic material in the world, Metallography of Steels continues to be an essential reference for students, metallographers, and engineers interested in understanding processing-properties-structure relationships of the material. The balance between theoretical and applied information makes this book a valuable companion for even experienced steel practitioners.
Author: George Krauss
Publisher: ASM International
ISBN: 1615030506
Category : Electronic book
Languages : en
Pages : 613
Get Book
Book Description
Steels: Processing, Structure, and Performance is a comprehensive guide to the broad, dynamic physical metallurgy of steels. The volume is an extensively revised and updated edition of the classic 1990 book Steels: Heat Treatment and Processing Principles. Eleven new chapters expand the coverage in the previous edition, and other chapters have been reorganized and updated. This volume is an essential reference for anyone who makes, uses, studies, or designs with steel. The interrelationships between chemistry, processing, structure, and performance--the elements of physical metallurgy--are integrated for all the types of steel discussed. The evolution, characterization, and performance of steel microstructures are described, with increased emphasis on deformation and fracture. Heat treatment remains a vital aspect of the manufacture of steel products, and the coverage of thermal processing and its effect on steels is expanded in this edition. Dramatic changes in steel manufacture have occurred in the 15 years since the publication of the 1990 edition. Low-carbon sheet steels have experienced the most dynamic changes: thermal processing of sheet steels on a massive continuous scale has produced new grades with only subtle changes in chemistry. Low carbon sheet steels, together with strengthening mechanisms, developments in microalloyed forging steels, steels with bainitic and a variety of ferritic microstructures, quench and tempered steel performance, high-carbon steels for rail and ultra-high strength wire, and the causes of low toughness and embrittlement are all discussed in new chapters. Brief coverage is provided on the history of steel, including the time frame for important developments. A link to steelmaking and solidification is made in the chapter on the effects of primary processing on steel microstructure. The text is meant to be informative, readable, up-to-date, and self contained. Principles, concepts, and understanding of microstructural evolution and performance, within the framework of processing and properties, are illustrated, by plots of data, micrographs and schematic diagrams. A special effort has been made to include references to the most pertinent books, reviews, and technical papers on a given subject. About the Author Dr. George Krauss is currently University Emeritus Professor at the Colorado School of Mines and a metallurgical consultant specializing in steel microstructural systems. He served at Lehigh University as Assistant Professor, Associate Professor, and Professor of Metallurgy and Materials Science from 1963 to 1975, and in 1975, joined the faculty of the Colorado School of Mines as the AMAX Foundation Professor in Physical Metallurgy. He was the John Henry Moore Professor of Metallurgical and Materials Engineering at the time of his retirement from the Colorado School of Mines in 1997. In 1984, Dr. Krauss was a principal in the establishment of the Advanced Steel Processing and Products Research Center, a National Science Foundation Industry-University cooperative research center at the Colorado School of Mines, and served as its first Director until 1993. In addition to the three editions of the present volume, he coauthored the book Tool Steels, Fifth Edition, ASM International, 1998, and edited or co-edited conference volumes on tempering of steel, carburizing, zinc-based coatings on steel, and microalloyed forging steels. He has published over 300 papers and lectured widely in technical conferences, universities, corporations and ASM International chapters, including a number of keynote, invited and honorary lectures. He presented the Edward DeMille Campbell Memorial Lecture of ASM International in 2000 and the Howe Memorial Lecture of the Iron and Steel Society in 2003. Dr. Krauss has served as the President of the International Federation of Heat Treatment and Surface Engineering (IFHTSE), 1989-91, and as President of ASM International, 1996-97. He is Fellow of ASM International, TMS, and IFHTSE. He has been awarded the Adolf Martens Medal of the German Society for Heat Treatment and Materials, the Charles S. Barrett Silver Medal of the Rocky Mountain Chapter of ASM, the George Brown Gold Medal of 3.
Author: International Metallographic Society. Technical Meeting
Publisher:
ISBN:
Category : Medical
Languages : en
Pages : 174
Get Book
Book Description
Author: Radhakanta Rana
Publisher: Springer Nature
ISBN: 3030538257
Category : Technology & Engineering
Languages : en
Pages : 673
Get Book
Book Description
The current state of understanding of emerging iron alloys and high-alloy ferrous systems, in comparison with some conventional steels, is compiled in this single volume to further their development. While most of the conventional steels are produced routinely today, many advanced high strength steels and iron-based alloys are still in the laboratory stage. The iron-based emerging alloys can yield high levels of mechanical and physical properties due to their new alloy concepts and novel microstructures leading to multiple benefits of their use in terms of sustainability and environmental impact. This book contains introductory chapters that present the requisite background knowledge on thermodynamics, phase diagrams, and processing routes used for the ferrous alloys to enable the readers a smooth understanding of the main chapters. Then, an overview of the conventional microalloyed steels and advanced high strength steels is given to present the benchmark of the existing steels and ferrous alloys manifesting their current state-of-the-art in terms of physical metallurgy and engineering applications. Subsequent chapters detail novel, emerging ferrous alloys and high-alloy ferrous systems. Summarizes the state-of-the-art of emerging iron-based alloys and the new processing and physical metallurgy-related developments of high-alloy iron systems; Explores new iron-based systems driven by the need for new properties, enhanced performance, sustainable processes and educed environmental impact; Compiles cutting-edge research on the progress of materials science of iron-based systems, from physical metallurgy to engineering applications, and possible avenues for future research.
Author: David A. Scott
Publisher: Getty Publications
ISBN: 0892361956
Category : Alloys
Languages : en
Pages : 185
Get Book
Book Description
David A. Scott provides a detailed introduction to the structure and morphology of ancient and historic metallic materials. Much of the scientific research on this important topic has been inaccessible, scattered throughout the international literature, or unpublished; this volume, although not exhaustive in its coverage, fills an important need by assembling much of this information in a single source. Jointly published by the GCI and the J. Paul Getty Museum, the book deals with many practical matters relating to the mounting, preparation, etching, polishing, and microscopy of metallic samples and includes an account of the way in which phase diagrams can be used to assist in structural interpretation. The text is supplemented by an extensive number of microstructural studies carried out in the laboratory on ancient and historic metals. The student beginning the study of metallic materials and the conservation scientist who wishes to carry out structural studies of metallic objects of art will find this publication quite useful.
Author: P.C. Angelo
Publisher: CRC Press
ISBN: 0429752466
Category : Technology & Engineering
Languages : en
Pages : 159
Get Book
Book Description
The book briefly describes the structure, properties and applications of various grades of steel, primarily aimed at non-metallurgical students from other engineering streams. The book consists of nine chapters covering most of the important types of steels and their physical metallurgy, microstructure and engineering applications including iron-carbon diagram, heat treatment, surface hardening methods, effect of alloying, specific applications, selection of materials, case studies and so forth. The book also contains subjective and objective questions aimed at exam preparation. Key Features Exclusive title aimed at introduction to steels for non-metallurgy audience Includes microstructure, composition, and properties of all the most commonly used steels Describes the heat treatments and the required alloying additions to process steel for the intended applications Discusses effects of alloying elements on steel Explores development of steels for specialized areas such as the automobile, aerospace, and nuclear industries
Author: David Llewellyn
Publisher: Elsevier
ISBN: 0080517765
Category : Technology & Engineering
Languages : en
Pages : 400
Get Book
Book Description
STEELS: Metallurgy and Applications provides a metallurgical understanding of commercial steel grades and the design, manufacturing and service requirements that govern their application. The properties of different steels are described, detailing the effect of composition, processing and heat treatment. Where appropriate an introduction is given to standard specifications and design codes provided on component manufacture and property requirements for successful service performance. The book deals with steel products in some depth, in four chapters covering wide strip, structural steels, engineering and stainless steel grades. At the begining of each chapter an overview is given which details important features of the grades and a historical perspective of their development. Also featured are up to date information on steel prices and specifications. David Llewellyn has over thirty years experience in the steel industry and is currently lecturing in the Materials Engineering Department at University College Swansea. '..the book unfolds into an easily readable and a valuable source of highly relevant and contemporary information on steels' - METALS AND MATERIALS '.. a high quality product from all points of view' - INSTITUTE OF METALS AND MATERIALS AUSTRALASIA features up to date information on steel prices and specifications.
Author: Henry Marion Howe
Publisher:
ISBN:
Category : Iron
Languages : en
Pages : 760
Get Book
Book Description
Author: Flake C. Campbell
Publisher: ASM International
ISBN: 1615030581
Category : Technology & Engineering
Languages : en
Pages : 671
Get Book
Book Description
This practical reference provides thorough and systematic coverage on both basic metallurgy and the practical engineering aspects of metallic material selection and application.
Author: Madeleine Durand-Charre
Publisher: Springer Science & Business Media
ISBN: 9783540209638
Category : Science
Languages : en
Pages : 422
Get Book
Book Description
The book comprises three parts. Part 1 gives a historical description of the development of ironworking techniques since the earliest times. Part 2 is the core of the book and deals with the metallurgical basis of microstructures, with four main themes: phase diagrams, solidification processes, diffusion, and solid state phase transformations. Part 3 begins by an introduction to steel design principles. It then goes on to consider the different categories of steels, placing emphasis on their specific microstructural features. Finally, a comprehensive reference list includes several hundred pertinent articles and books. The book is the work of a single author, thus ensuring uniformity and concision. It is intended for scientists, metallurgical engineers and senior technicians in research and development laboratories, design offices and quality departments, as well as for teachers and students in universities, technical colleges and other higher education establishments.
