Design of Reinforced Concrete Sections Under Bending and Axial Forces PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Design of Reinforced Concrete Sections Under Bending and Axial Forces PDF full book. Access full book title Design of Reinforced Concrete Sections Under Bending and Axial Forces by Helena Barros. Download full books in PDF and EPUB format.
Author: Helena Barros
Publisher: Springer Nature
ISBN: 303080139X
Category : Technology & Engineering
Languages : en
Pages : 182
Get Book
Book Description
This book contains auxiliary calculation tools to facilitate the safety assessment of reinforced concrete sections. Essential parameters in the design to the ultimate limit state of resistance such as the percentage of reinforcement and the position of the neutral axis in concrete cross-sections, as well as the control of the maximum stresses in service limit states are provided by these tools. A set of tables, charts and diagrams used to design cross-sections of reinforced and prestressed concrete structures are supplied. The most current beams and columns cross-sections namely, rectangular, circular and T-sections are considered. These tools have been prepared in line with the provisions of the new European regulations, with particular reference to Eurocode 2 – Design of Concrete Structures. The book stands as an ideal learning resource for students of structural design and analysis courses in civil engineering, building construction and architecture, as well as a valuable reference for concrete structural design professionals in practice.
Author: Helena Barros
Publisher: Springer Nature
ISBN: 303080139X
Category : Technology & Engineering
Languages : en
Pages : 182
Get Book
Book Description
This book contains auxiliary calculation tools to facilitate the safety assessment of reinforced concrete sections. Essential parameters in the design to the ultimate limit state of resistance such as the percentage of reinforcement and the position of the neutral axis in concrete cross-sections, as well as the control of the maximum stresses in service limit states are provided by these tools. A set of tables, charts and diagrams used to design cross-sections of reinforced and prestressed concrete structures are supplied. The most current beams and columns cross-sections namely, rectangular, circular and T-sections are considered. These tools have been prepared in line with the provisions of the new European regulations, with particular reference to Eurocode 2 – Design of Concrete Structures. The book stands as an ideal learning resource for students of structural design and analysis courses in civil engineering, building construction and architecture, as well as a valuable reference for concrete structural design professionals in practice.
Author: Giandomenico Toniolo
Publisher: Springer
ISBN: 3319520334
Category : Technology & Engineering
Languages : en
Pages : 836
Get Book
Book Description
This textbook describes the basic mechanical features of concrete and explains the main resistant mechanisms activated in the reinforced concrete structures and foundations when subjected to centred and eccentric axial force, bending moment, shear, torsion and prestressing. It presents a complete set of limit-state design criteria of the modern theory of RC incorporating principles and rules of the final version of the official Eurocode 2. This textbook examines methodological more than notional aspects of the presented topics, focusing on the verifications of assumptions, the rigorousness of the analysis and the consequent degree of reliability of results. Each chapter develops an organic topic, which is eventually illustrated by examples in each final paragraph containing the relative numerical applications. These practical end-of-chapter appendices and intuitive flow-charts ensure a smooth learning experience. The book stands as an ideal learning resource for students of structural design and analysis courses in civil engineering, building construction and architecture, as well as a valuable reference for concrete structural design professionals in practice.
Author: B.S. Choo
Publisher: CRC Press
ISBN: 1482266989
Category : Architecture
Languages : en
Pages : 479
Get Book
Book Description
This new edition of a highly practical text gives a detailed presentation of the design of common reinforced concrete structures to limit state theory in accordance with BS 8110.
Author: Alan Williams
Publisher: Dearborn Trade Publishing
ISBN: 9780793185399
Category : Reinforced concrete construction
Languages : en
Pages : 406
Get Book
Book Description
Here is a comprehensive guide and reference to assist civil engineers preparing for the Structural Engineer Examination. It offers 350 pages of text and 70 design problems with complete step-by-step solutions. Topics covered: Materials for Reinforced Concrete; Limit State Principles; Flexure of Reinforced Concrete Beams; Shear and Torsion of Concrete Beams; Bond and Anchorage; Design of Reinforced Concrete Columns; Design of Reinforced Concrete Slabs and Footings; Retaining Walls; and Piled Foundations. An index is provided.
Author: Jack C. McCormac
Publisher: Wiley Global Education
ISBN: 1118878981
Category : Technology & Engineering
Languages : en
Pages : 672
Get Book
Book Description
Design of Reinforced Concrete, 10th Edition by Jack McCormac and Russell Brown, introduces the fundamentals of reinforced concrete design in a clear and comprehensive manner and grounded in the basic principles of mechanics of solids. Students build on their understanding of basic mechanics to learn new concepts such as compressive stress and strain in concrete, while applying current ACI Code.
Author: Jostein Hellesland
Publisher: John Wiley & Sons
ISBN: 1118635329
Category : Science
Languages : en
Pages : 224
Get Book
Book Description
This book is focused on the theoretical and practical design of reinforced concrete beams, columns and frame structures. It is based on an analytical approach of designing normal reinforced concrete structural elements that are compatible with most international design rules, including for instance the European design rules – Eurocode 2 – for reinforced concrete structures. The book tries to distinguish between what belongs to the structural design philosophy of such structural elements (related to strength of materials arguments) and what belongs to the design rule aspects associated with specific characteristic data (for the material or loading parameters). A previous book, entitled Reinforced Concrete Beams, Columns and Frames – Mechanics and Design, deals with the fundamental aspects of the mechanics and design of reinforced concrete in general, both related to the Serviceability Limit State (SLS) and the Ultimate Limit State (ULS), whereas the current book deals with more advanced ULS aspects, along with instability and second-order analysis aspects. Some recent research results including the use of non-local mechanics are also presented. This book is aimed at Masters-level students, engineers, researchers and teachers in the field of reinforced concrete design. Most of the books in this area are very practical or code-oriented, whereas this book is more theoretically based, using rigorous mathematics and mechanics tools. Contents 1. Advanced Design at Ultimate Limit State (ULS). 2. Slender Compression Members – Mechanics and Design. 3. Approximate Analysis Methods. Appendix 1. Cardano’s Method. Appendix 2. Steel Reinforcement Table. About the Authors Jostein Hellesland has been Professor of Structural Mechanics at the University of Oslo, Norway since January 1988. His contribution to the field of stability has been recognized and magnified by many high-quality papers in famous international journals such as Engineering Structures, Thin-Walled Structures, Journal of Constructional Steel Research and Journal of Structural Engineering. Noël Challamel is Professor in Civil Engineering at UBS, University of South Brittany in France and chairman of the EMI-ASCE Stability committee. His contributions mainly concern the dynamics, stability and inelastic behavior of structural components, with special emphasis on Continuum Damage Mechanics (more than 70 publications in International peer-reviewed journals). Charles Casandjian was formerly Associate Professor at INSA (French National Institute of Applied Sciences), Rennes, France and the chairman of the course on reinforced concrete design. He has published work on the mechanics of concrete and is also involved in creating a web experience for teaching reinforced concrete design – BA-CORTEX. Christophe Lanos is Professor in Civil Engineering at the University of Rennes 1 in France. He has mainly published work on the mechanics of concrete, as well as other related subjects. He is also involved in creating a web experience for teaching reinforced concrete design – BA-CORTEX.
Author: FIB – International Federation for Structural Concrete
Publisher: FIB - International Federation for Structural Concrete
ISBN: 2883940266
Category : Technology & Engineering
Languages : en
Pages : 247
Get Book
Book Description
The first part of the report is devoted to linear elements (beams, columns) and includes chapters on shear and flexure in beams, ultimate limit state design of prestressed beams, and of reinforced concrete members under combination of bending with axial load and shear, of beams subjected to torsion, and a chapter on shear design based on truss models with crack friction. The second part treats two-dimensional elements and includes background information on ULS design of wall, shell, and slab elements. lt concludes with a chapter on axisymmetric punching of slabs.
Author: A. Ghali
Publisher: CRC Press
ISBN: 0203987527
Category : Technology & Engineering
Languages : en
Pages : 609
Get Book
Book Description
Concrete structures must be designed not only to be safe against failure but also to perform satisfactorily in use. This book is written for practising engineers and students, and focuses on design methods for checking deflections and cracking which can affect the serviceability of reinforced and prestressed concrete structures. The authors present accurate and easy-to-apply methods of analysing immediate and long-term stresses and deformations. These methods allow designers to account for variations of concrete properties from project to project and from country to country, making the book universally applicable. Comprehensively updated, this third edition of Concrete Structures also includes four new chapters covering such topics as: non-linear analysis of plane frames, design for serviceability of prestressed concrete, serviceability of members reinforced with fibre polymer bars, and the analysis of time-dependent internal forces with linear computer programs that are routinely used by structural designers. A website accompanies the book, featuring three design calculation programs related to stresses in cracked sections, creep coefficients and time-dependent analysis. The book contains numerous examples, some of which are worked out in the SI units and others in the Imperial units. The input data and the main results are given in both SI and Imperial units. The book is not tied to any specific code, although the latest American and European codes of practice are covered in the appendices.
Author: M. A. Mansur
Publisher: CRC Press
ISBN: 9780849374357
Category : Technology & Engineering
Languages : en
Pages : 240
Get Book
Book Description
This book compiles state-of-the-art information on the behavior, analysis, and design of concrete beams containing transverse openings. Discussions include the need, effects, and classification of openings as well as the general requirements for fulfilling design pure bending, combined bending, and shear - illustrated with numerical examples torsion alone or in combination with bending and shear large rectangular openings as well as opening size and location on beam behavior methods for analyzing ultimate strength and serviceability requirements effects of torsion in beams large openings in continuous beams and their effects on possible redistribution of internal forces as well as guidelines and procedures for the design of such beams effect of prestressing on the serviceability and strength of beams with web openings design against cracking at openings and ultimate loads Concrete Beams with Openings serves as an invaluable source of information for designers and practicing engineers, especially useful since little or no provision or guidelines are currently available in most building codes.
Author: Mete A. Sozen
Publisher: CRC Press
ISBN: 1482231484
Category : Technology & Engineering
Languages : en
Pages : 300
Get Book
Book Description
Encouraging creative uses of reinforced concrete, Principles of Reinforced Concrete Design draws a clear distinction between fundamentals and professional consensus. This text presents a mixture of fundamentals along with practical methods. It provides the fundamental concepts required for designing reinforced concrete (RC) structures, emphasizing principles based on mechanics, experience, and experimentation, while encouraging practitioners to consult their local building codes. The book presents design choices that fall in line with the boundaries defined by professional consensus (building codes), and provides reference material outlining the design criteria contained in building codes. It includes applications for both building and bridge structural design, and it is applicable worldwide, as it is not dependent upon any particular codes. Contains concise coverage that can be taught in one semester Underscores the fundamental principles of behavior Provides students with an understanding of the principles upon which codes are based Assists in navigating the labyrinth of ever-changing codes Fosters an inherent understanding of design The text also provides a brief history of reinforced concrete. While the initial attraction for using reinforced concrete in building construction has been attributed to its fire resistance, its increase in popularity was also due to the creativity of engineers who kept extending its limits of application. Along with height achievement, reinforced concrete gained momentum by providing convenience, plasticity, and low-cost economic appeal. Principles of Reinforced Concrete Design provides undergraduate students with the fundamentals of mechanics and direct observation, as well as the concepts required to design reinforced concrete (RC) structures, and applies to both building and bridge structural design.
