Author: John E. Lagnese
Publisher: Springer Science & Business Media
ISBN: 1461384605
Category : Science
Languages : en
Pages : 253
Get Book
Book Description
The articles in this volume focus on control theory of systems governed by nonlinear linear partial differential equations, identification and optimal design of such systems, and modelling of advanced materials. Optimal design of systems governed by PDEs is a relatively new area of study, now particularly relevant because of interest in optimization of fluid flow in domains of variable configuration, advanced and composite materials studies and "smart" materials which include possibilities for built in sensing and control actuation. The book will be of interest to both applied mathematicians and to engineers.
Author: Kirsten A. Morris
Publisher: Springer Nature
ISBN: 3030349497
Category : Technology & Engineering
Languages : en
Pages : 295
Get Book
Book Description
This book addresses controller and estimator design for systems that vary both spatially and in time: systems like fluid flow, acoustic noise and flexible structures. It includes coverage of the selection and placement of actuators and sensors for such distributed-parameter systems. The models for distributed parameter systems are coupled ordinary/partial differential equations. Approximations to the governing equations, often of very high order, are required and this complicates both controller design and optimization of the hardware locations. Control system and estimator performance depends not only on the controller/estimator design but also on the location of the hardware. In helping the reader choose the best location for actuators and sensors, the analysis provided in this book is crucial because neither intuition nor trial-and-error is foolproof, especially where multiple sensors and actuators are required, and moving hardware can be difficult and costly. The mechatronic approach advocated, in which controller design is integrated with actuator location, can lead to better performance without increased cost. Similarly, better estimation can be obtained with carefully placed sensors. The text shows how proper hardware placement varies depending on whether, disturbances are present, whether the response should be reduced to an initial condition or whether controllability and/or observability have to be optimized. This book is aimed at non-specialists interested in learning controller design for distributed-parameter systems and the material presented has been used for student teaching. The relevant basic systems theory is presented and followed by a description of controller synthesis using lumped approximations. Numerical algorithms useful for efficient implementation in real engineering systems and practical computational challenges are also described and discussed.
Author: Dariusz Ucinski
Publisher: CRC Press
ISBN: 0203026780
Category : Mathematics
Languages : en
Pages : 392
Get Book
Book Description
For dynamic distributed systems modeled by partial differential equations, existing methods of sensor location in parameter estimation experiments are either limited to one-dimensional spatial domains or require large investments in software systems. With the expense of scanning and moving sensors, optimal placement presents a critical problem.
Author: J. L. Lions
Publisher: SIAM
ISBN: 9781611970616
Category : Mathematics
Languages : en
Pages : 98
Get Book
Book Description
The applications of the theory of Optimal Control of distributed parameters is an extremely wide field and, although a large number of questions remain open, the whole subject continues to expand very rapidly. The author does not attempt to cover the field but does discuss a number of the more interesting areas of application.
Author: Alfred C. Robinson
Publisher:
ISBN:
Category : Control theory
Languages : en
Pages : 54
Get Book
Book Description
The report is a survey of theoretical and computational methods in the field of optimal control of distributed parameter systems. This includes systems described by integral equations and partial differential equations. The various studies which have been done are grouped according to the method employed. A number of applications and potential applications of these methods are discussed, and certain deficiencies in the current state of knowledge are noted. Difficulties and opportunities in practical applications are discussed, and suggestions are offered for directions of research to render the results more readily usable. A list of references is included numbering more than 250 items: papers, report, and books.
Author: Arben Çela
Publisher: Springer Science & Business Media
ISBN: 3319027298
Category : Technology & Engineering
Languages : en
Pages : 288
Get Book
Book Description
Optimal Design of Distributed Control and Embedded Systems focuses on the design of special control and scheduling algorithms based on system structural properties as well as on analysis of the influence of induced time-delay on systems performances. It treats the optimal design of distributed and embedded control systems (DCESs) with respect to communication and calculation-resource constraints, quantization aspects, and potential time-delays induced by the associated communication and calculation model. Particular emphasis is put on optimal control signal scheduling based on the system state. In order to render this complex optimization problem feasible in real time, a time decomposition is based on periodicity induced by the static scheduling is operated. The authors present a co-design approach which subsumes the synthesis of the optimal control laws and the generation of an optimal schedule of control signals on real-time networks as well as the execution of control tasks on a single processor. The authors also operate a control structure modification or a control switching based on a thorough analysis of the influence of the induced time-delay system influence on stability and system performance in order to optimize DCES performance in case of calculation and communication resource limitations. Although the richness and variety of classes of DCES preclude a completely comprehensive treatment or a single “best” method of approaching them all, this co-design approach has the best chance of rendering this problem feasible and finding the optimal or some sub-optimal solution. The text is rounded out with references to such applications as car suspension and unmanned vehicles. Optimal Design of Distributed Control and Embedded Systems will be of most interest to academic researchers working on the mathematical theory of DCES but the wide range of environments in which they are used also promotes the relevance of the text for control practitioners working in the avionics, automotive, energy-production, space exploration and many other industries.
Author: H. T. Banks
Publisher: SIAM
ISBN: 9781611970982
Category : Technology & Engineering
Languages : en
Pages : 239
Get Book
Book Description
Research in control and estimation of distributed parameter systems encompasses a wide range of applications including both fundamental science and emerging technologies. The latter include smart materials (piezoceramics, shape memory alloys, magnetostrictives, electrorheological fluids) fabrication and testing, design of high-pressure chemical vapor deposition (CVD) reactors for production of microelectronic surfaces (e.g., semiconductors), while the former include groundwater contamination cleanup and other environmental modeling questions, climatology, flow control, and fluid-structure interactions as well as more traditional topics in biology, mechanics, and acoustics. These expository papers provide substantial stimulus to both young researchers and experienced investigators in control theory. Includes a comprehensive and lucid presentation that relates frequency domain techniques to state-space or time domain approaches for infinite-dimensional systems including design of robust stabilizing and finite-dimensional controllers for infinite-dimensional systems. It focuses on these two approaches to control design in an integrated system theoretic framework. This is excellent reading for researchers in both the frequency domain and time domain control communities. In other articles, topics considered include pointwise control of distributed parameter systems, bounded and unbounded sensors and actuators, stabilization issues for large flexible structures, and an overview discussion of damping models for flexible structures.
Author: Grigory Sklyar
Publisher: Springer Nature
ISBN: 3030617424
Category : Science
Languages : en
Pages : 139
Get Book
Book Description
This book presents recent results and envisages new solutions of the stabilization problem for infinite-dimensional control systems. Its content is based on the extended versions of presentations at the Thematic Minisymposium “Stabilization of Distributed Parameter Systems: Design Methods and Applications” at ICIAM 2019, held in Valencia from 15 to 19 July 2019. This volume aims at bringing together contributions on stabilizing control design for different classes of dynamical systems described by partial differential equations, functional-differential equations, delay equations, and dynamical systems in abstract spaces. This includes new results in the theory of nonlinear semigroups, port-Hamiltonian systems, turnpike phenomenon, and further developments of Lyapunov's direct method. The scope of the book also covers applications of these methods to mathematical models in continuum mechanics and chemical engineering. It is addressed to readers interested in control theory, differential equations, and dynamical systems.
Author: M. Amouroux
Publisher: Elsevier
ISBN: 1483298817
Category : Technology & Engineering
Languages : en
Pages : 523
Get Book
Book Description
This volume presents state-of-the-art reports on the theory, and current and future applications of control of distributed parameter systems. The papers cover the progress not only in traditional methodology and pure research in control theory, but also the rapid growth of its importance for different applications. This title will be of interest to researchers working in the areas of mathematics, automatic control, computer science and engineering.
Author: Ralph C. Smith
Publisher: SIAM
ISBN: 0898715482
Category : Mathematics
Languages : en
Pages : 283
Get Book
Book Description
Eleven chapters, written by experts in their respective fields, on topics ranging from control of the Navier-Stokes equations to nondestructive evaluation - all of which are modeled by distributed parameter systems.
