Architecture and Design of Distributed Embedded Systems PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Architecture and Design of Distributed Embedded Systems PDF full book. Access full book title Architecture and Design of Distributed Embedded Systems by Bernd Kleinjohann. Download full books in PDF and EPUB format.
Author: Bernd Kleinjohann
Publisher:
ISBN: 9781475745344
Category :
Languages : en
Pages : 252
Get Book
Book Description
Author: Bernd Kleinjohann
Publisher:
ISBN: 9781475745344
Category :
Languages : en
Pages : 252
Get Book
Book Description
Author: Bernd Kleinjohann
Publisher: Springer
ISBN: 0387354093
Category : Computers
Languages : en
Pages : 238
Get Book
Book Description
Due to the decreasing production costs of IT systems, applications that had to be realised as expensive PCBs formerly, can now be realised as a system-on-chip. Furthermore, low cost broadband communication media for wide area communication as well as for the realisation of local distributed systems are available. Typically the market requires IT systems that realise a set of specific features for the end user in a given environment, so called embedded systems. Some examples for such embedded systems are control systems in cars, airplanes, houses or plants, information and communication devices like digital TV, mobile phones or autonomous systems like service- or edutainment robots. For the design of embedded systems the designer has to tackle three major aspects: The application itself including the man-machine interface, The (target) architecture of the system including all functional and non-functional constraints and, the design methodology including modelling, specification, synthesis, test and validation. The last two points are a major focus of this book. This book documents the high quality approaches and results that were presented at the International Workshop on Distributed and Parallel Embedded Systems (DIPES 2000), which was sponsored by the International Federation for Information Processing (IFIP), and organised by IFIP working groups WG10.3, WG10.4 and WG10.5. The workshop took place on October 18-19, 2000, in Schloß Eringerfeld near Paderborn, Germany. Architecture and Design of Distributed Embedded Systems is organised similar to the workshop. Chapters 1 and 4 (Methodology I and II) deal with different modelling and specification paradigms and the corresponding design methodologies. Generic system architectures for different classes of embedded systems are presented in Chapter 2. In Chapter 3 several design environments for the support of specific design methodologies are presented. Problems concerning test and validation are discussed in Chapter 5. The last two chapters include distribution and communication aspects (Chapter 6) and synthesis techniques for embedded systems (Chapter 7). This book is essential reading for computer science researchers and application developers.
Author: Hermann Kopetz
Publisher: Springer Science & Business Media
ISBN: 0306470551
Category : Computers
Languages : en
Pages : 338
Get Book
Book Description
7. 6 Performance Comparison: ET versus TT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 7. 7 The Physical Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 Points to Remember . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 Chapter 8: The Time-Triggered Protocols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 8. 1 Introduction to Time-Triggered Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 8. 2 Overview of the TTP/C Protocol Layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 8. 3 TheBasic CNI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 Internal Operation of TTP/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 8. 4 8. 5 TTP/A for Field Bus Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Review Questions and Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Chapter 9: Input/Output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 9. 1 The Dual Role of Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194 9. 2 Agreement Protocol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 9. 3 Sampling and Polling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198 9. 4 Interrupts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201 9. 5 Sensors and Actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 9. 6 Physical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 Bibliographic Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 Chapter 10: Real-Time Operating Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 10. 1 Task Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 10. 2 Interprocess Communication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 10. 3 Time Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 10. 4 Error Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 10. 5 A Case Study: ERCOS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 Bibliographic Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Review Questions and Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 Chapter 11: Real-Time Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 11. 1 The Scheduling Problem. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228 11. 2 The Adversary Argument. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 11. 3 Dynamic Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231 x TABLE OF CONTENTS 11. 4 Static Scheduling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237 Points to Remember. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240 Bibliographic Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 Review Questions and Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 Chapter 12: Validation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 12. 1 Building aConvincing Safety Case. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246 12. 2 Formal Methods. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248 12. 3 Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Author: Daniele Lacamera
Publisher: Packt Publishing Ltd
ISBN: 1788830288
Category : Computers
Languages : en
Pages : 317
Get Book
Book Description
Learn to design and develop safe and reliable embedded systems Key Features Identify and overcome challenges in embedded environments Understand the steps required to increase the security of IoT solutions Build safety-critical and memory-safe parallel and distributed embedded systems Book Description Embedded systems are self-contained devices with a dedicated purpose. We come across a variety of fields of applications for embedded systems in industries such as automotive, telecommunications, healthcare and consumer electronics, just to name a few. Embedded Systems Architecture begins with a bird's eye view of embedded development and how it differs from the other systems that you may be familiar with. You will first be guided to set up an optimal development environment, then move on to software tools and methodologies to improve the work flow. You will explore the boot-up mechanisms and the memory management strategies typical of a real-time embedded system. Through the analysis of the programming interface of the reference microcontroller, you'll look at the implementation of the features and the device drivers. Next, you'll learn about the techniques used to reduce power consumption. Then you will be introduced to the technologies, protocols and security aspects related to integrating the system into IoT solutions. By the end of the book, you will have explored various aspects of embedded architecture, including task synchronization in a multi-threading environment, and the safety models adopted by modern real-time operating systems. What you will learn Participate in the design and definition phase of an embedded product Get to grips with writing code for ARM Cortex-M microcontrollers Build an embedded development lab and optimize the workflow Write memory-safe code Understand the architecture behind the communication interfaces Understand the design and development patterns for connected and distributed devices in the IoT Master multitask parallel execution patterns and real-time operating systems Who this book is for If you’re a software developer or designer wanting to learn about embedded programming, this is the book for you. You’ll also find this book useful if you’re a less experienced embedded programmer willing to expand your knowledge.
Author: Hermann Kopetz
Publisher: Springer Science & Business Media
ISBN: 144198237X
Category : Computers
Languages : en
Pages : 378
Get Book
Book Description
"This book is a comprehensive text for the design of safety critical, hard real-time embedded systems. It offers a splendid example for the balanced, integrated treatment of systems and software engineering, helping readers tackle the hardest problems of advanced real-time system design, such as determinism, compositionality, timing and fault management. This book is an essential reading for advanced undergraduates and graduate students in a wide range of disciplines impacted by embedded computing and software. Its conceptual clarity, the style of explanations and the examples make the abstract concepts accessible for a wide audience." Janos Sztipanovits, Director E. Bronson Ingram Distinguished Professor of Engineering Institute for Software Integrated Systems Vanderbilt University Real-Time Systems focuses on hard real-time systems, which are computing systems that must meet their temporal specification in all anticipated load and fault scenarios. The book stresses the system aspects of distributed real-time applications, treating the issues of real-time, distribution and fault-tolerance from an integral point of view. A unique cross-fertilization of ideas and concepts between the academic and industrial worlds has led to the inclusion of many insightful examples from industry to explain the fundamental scientific concepts in a real-world setting. Compared to the first edition, new developments in complexity management, energy and power management, dependability, security, and the internet of things, are addressed. The book is written as a standard textbook for a high-level undergraduate or graduate course on real-time embedded systems or cyber-physical systems. Its practical approach to solving real-time problems, along with numerous summary exercises, makes it an excellent choice for researchers and practitioners alike.
Author: Bernd Kleinjohann
Publisher: Springer Science & Business Media
ISBN: 0387096604
Category : Computers
Languages : en
Pages : 236
Get Book
Book Description
This year, the IFIP Working Conference on Distributed and Parallel Embedded Sys tems (DIPES 2008) is held as part of the IFIP World Computer Congress, held in Milan on September 7 10, 2008. The embedded systems world has a great deal of experience with parallel and distributed computing. Many embedded computing systems require the high performance that can be delivered by parallel computing. Parallel and distributed computing are often the only ways to deliver adequate real time performance at low power levels. This year’s conference attracted 30 submissions, of which 21 were accepted. Prof. Jor ̈ g Henkel of the University of Karlsruhe graciously contributed a keynote address on embedded computing and reliability. We would like to thank all of the program committee members for their diligence. Wayne Wolf, Bernd Kleinjohann, and Lisa Kleinjohann Acknowledgements We would like to thank all people involved in the organization of the IFIP World Computer Congress 2008, especially the IPC Co Chairs Judith Bishop and Ivo De Lotto, the Organization Chair Giulio Occhini, as well as the Publications Chair John Impagliazzo. Further thanks go to the authors for their valuable contributions to DIPES 2008. Last but not least we would like to acknowledge the considerable amount of work and enthusiasm spent by our colleague Claudius Stern in preparing theproceedingsofDIPES2008. Hemadeitpossibletoproducethemintheircurrent professional and homogeneous style.
Author: Hamidreza Ahmadian
Publisher: CRC Press
ISBN: 1351117807
Category : Computers
Languages : en
Pages : 709
Get Book
Book Description
This book describes a cross-domain architecture and design tools for networked complex systems where application subsystems of different criticality coexist and interact on networked multi-core chips. The architecture leverages multi-core platforms for a hierarchical system perspective of mixed-criticality applications. This system perspective is realized by virtualization to establish security, safety and real-time performance. The impact further includes a reduction of time-to-market, decreased development, deployment and maintenance cost, and the exploitation of the economies of scale through cross-domain components and tools. Describes an end-to-end architecture for hypervisor-level, chip-level, and cluster level. Offers a solution for different types of resources including processors, on-chip communication, off-chip communication, and I/O. Provides a cross-domain approach with examples for wind-power, health-care, and avionics. Introduces hierarchical adaptation strategies for mixed-criticality systems Provides modular verification and certification methods for the seamless integration of mixed-criticality systems. Covers platform technologies, along with a methodology for the development process. Presents an experimental evaluation of technological results in cooperation with industrial partners. The information in this book will be extremely useful to industry leaders who design and manufacture products with distributed embedded systems in mixed-criticality use-cases. It will also benefit suppliers of embedded components or development tools used in this area. As an educational tool, this material can be used to teach students and working professionals in areas including embedded systems, computer networks, system architecture, dependability, real-time systems, and avionics, wind-power and health-care systems.
Author: Tammy Noergaard
Publisher: Newnes
ISBN: 0123821975
Category : Computers
Languages : en
Pages : 672
Get Book
Book Description
Embedded Systems Architecture is a practical and technical guide to understanding the components that make up an embedded system’s architecture. This book is perfect for those starting out as technical professionals such as engineers, programmers and designers of embedded systems; and also for students of computer science, computer engineering and electrical engineering. It gives a much-needed ‘big picture’ for recently graduated engineers grappling with understanding the design of real-world systems for the first time, and provides professionals with a systems-level picture of the key elements that can go into an embedded design, providing a firm foundation on which to build their skills. Real-world approach to the fundamentals, as well as the design and architecture process, makes this book a popular reference for the daunted or the inexperienced: if in doubt, the answer is in here! Fully updated with new coverage of FPGAs, testing, middleware and the latest programming techniques in C, plus complete source code and sample code, reference designs and tools online make this the complete package Visit the companion web site at http://booksite.elsevier.com/9780123821966/ for source code, design examples, data sheets and more A true introductory book, provides a comprehensive get up and running reference for those new to the field, and updating skills: assumes no prior knowledge beyond undergrad level electrical engineering Addresses the needs of practicing engineers, enabling it to get to the point more directly, and cover more ground. Covers hardware, software and middleware in a single volume Includes a library of design examples and design tools, plus a complete set of source code and embedded systems design tutorial materials from companion website
Author: Bernd Kleinjohann
Publisher:
ISBN: 9781475780116
Category :
Languages : en
Pages : 340
Get Book
Book Description
Author: Daniele Lacamera
Publisher: Packt Publishing Ltd
ISBN: 1803242051
Category : Computers
Languages : en
Pages : 342
Get Book
Book Description
Design safe and reliable software for embedded systems and explore the internals of device drivers, RTOS, and TEE Key FeaturesIdentify and overcome challenges in embedded environmentsUnderstand and implement the steps required to increase the security of IoT solutionsBuild safety-critical and memory-safe parallel and distributed embedded systemsBook Description Embedded Systems Architecture begins with a bird's-eye view of embedded development and how it differs from the other systems that you may be familiar with. This book will help you get the hang of the internal working of various components in real-world systems. You'll start by setting up a development environment and then move on to the core system architectural concepts, exploring system designs, boot-up mechanisms, and memory management. As you progress through the topics, you'll explore the programming interface and device drivers to establish communication via TCP/IP and take measures to increase the security of IoT solutions. Finally, you'll be introduced to multithreaded operating systems through the development of a scheduler and the use of hardware-assisted trusted execution mechanisms. With the help of this book, you will gain the confidence to work with embedded systems at an architectural level and become familiar with various aspects of embedded software development on microcontrollers—such as memory management, multithreading, and RTOS—an approach oriented to memory isolation. What you will learnParticipate in the design and definition phase of an embedded productGet to grips with writing code for ARM Cortex-M microcontrollersBuild an embedded development lab and optimize the workflowSecure embedded systems with TLSDemystify the architecture behind the communication interfacesUnderstand the design and development patterns for connected and distributed devices in the IoTMaster multitasking parallel execution patterns and real-time operating systemsBecome familiar with Trusted Execution Environment (TEE)Who this book is for If you're a software developer or designer looking to learn about embedded programming, this is the book for you. You'll also find this book useful if you're a beginner or a less experienced embedded programmer on a quest to expand your knowledge on embedded systems.
